计算机应用 ›› 2011, Vol. 31 ›› Issue (04): 1152-1154.DOI: 10.3724/SP.J.1087.2011.01152

• 典型应用 • 上一篇    下一篇

基于串行通信不完全数据采集的融合估计算法

杨世华1,王秀敏2,朱烨俊3,任建新1   

  1. 1. 中国计量学院 信息工程学院,杭州 310018
    2. 中国计量学院
    3. 杭州专用汽车有限责任公司,杭州 310018
  • 收稿日期:2010-09-01 修回日期:2010-11-17 发布日期:2011-04-08 出版日期:2011-04-01
  • 通讯作者: 王秀敏
  • 作者简介:杨世华(1985-),男,山东日照人,硕士研究生,主要研究方向:嵌入式应用;
    王秀敏(1963-),女,辽宁锦州人,教授,主要研究方向:通信信号处理;
    朱烨俊(1985-),男,浙江杭州人,工程师,主要研究方向:纺机设计与制造;
    任建新(1987-),女,山西晋中人,硕士研究生,主要研究方向:嵌入式应用。
  • 基金资助:
    国家质检总局科技计划项目(2009QK027);浙江省科技计划优先主题重点工业项目(2010C11024);杭州经济技术开发区产学研合作项目(201002)

Data fusion estimation algorithm based on serial communication missing measurements

  • Received:2010-09-01 Revised:2010-11-17 Online:2011-04-08 Published:2011-04-01

摘要: 针对监控系统采用串行电路作为数据传输方式具有一定延迟的弊端,提出一种基于异步串行数据融合的新算法。首先将随机接收自多传感器系统多采集目标的数据统一映射到融合中心的坐标系中,在融合周期内,状态更新时采用距前一融合时刻最近的观测值作为反馈,状态和观测预计时采用扩展卡尔曼滤波,从而获得基于全局的融合估计值和误差。仿真结果表明该算法估计误差更低,且随着串行系统数目的增加估计误差的增加幅度有明显降低。

关键词: 空间定位, 数据融合, 串行通信, 不完全数据采集

Abstract: Concerning the multi-way delay problem in the serial communication monitoring system, a new algorithm of data fusion estimation based on serial communication missing measurements was proposed. Firstly, the algorithm mapped measurements randomly received from the multi-sensor system in the reference frame with fusion center. During the fusion period, the measurements, which were close to last fusion period, were used in the state update step. In state and measurements prediction step, the extended Kalman filter was used to obtain the global estimation and error. Finally, the simulation results show that the algorithm has a lower estimation error, and with the increase in the number of serial systems, estimation error rate of increase has decreased.

Key words: space coordinate, data fusion, serial communication, missing measurements

中图分类号: