计算机应用 ›› 2013, Vol. 33 ›› Issue (04): 1183-1186.DOI: 10.3724/SP.J.1087.2013.01183

• 典型应用 • 上一篇    下一篇

基于IEEE1451的智能监控系统数据交换技术研究

叶廷东1,黄国健2,洪晓斌3   

  1. 1. 广东轻工职业技术学院 计算机工程系,广州 510300
    2. 广州市特种机电设备检测研究院,广州510180
    3. 华南理工大学 机械与汽车工程学院,广州 510640
  • 收稿日期:2012-10-15 修回日期:2012-11-28 出版日期:2013-04-01 发布日期:2013-04-23
  • 通讯作者: 叶廷东
  • 作者简介:叶廷东(1976-),男,江西南康人,讲师,博士,主要研究方向:网络化检测与智能传感;黄国健(1981-),男,广东清远人,工程师,博士,主要研究方向:智能传感;洪晓斌(1979-),男,广东潮州人,副教授,博士,主要研究方向:网络化测控与仪表。
  • 基金资助:

    广东省自然科学基金资助项目(S2012040007521)

Data Exchanging Technology Research of Intelligent Measuring and Control system Based on IEEE1451

YE Tingdong1,HUANG Guojian2,HONG Xiaobin3   

  1. 1. Computer Department, Guangdong Industry Technical College, Guangzhou Guangdong 510300, China
    2. Guangzhou Academy of Special Equipment Inspection, Guangzhou Guangdong 510180, China
    3. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou Guangdong 510640, China
  • Received:2012-10-15 Revised:2012-11-28 Online:2013-04-23 Published:2013-04-01
  • Contact: YE Tingdong

摘要: 针对物联网技术应用发展和监控系统数据统一建模的需求,在IEEE1451标准的架构下,设计一种具有传感器即插即用、IPv6数据通信功能的智能监控系统结构,并利用UML建模实现从工业底层传感器、智能监控节点到远程监控应用的网络数据流的动态描述,完成XML通用数据交换接口的设计。将智能监控系统应用于乙醇生产流程工业中,结果表明:基于IEEE1451标准,运用XML数据交换技术,实现了监测数据的准确、高效传输,数据交换时延约0.51ms,可满足应用系统的开放性、跨平台和网络化实时监测应用的要求。

关键词: 智能监控系统, IEEE1451, 可扩展标记语言, 数据交换, 物联网

Abstract: With regard to the requirement of Internet of Things (IoT) application development and the data unification-modeling requirement of Measuring and Control System (MCS), the paper designed a MCS structure based on IEEE1451 standard, which had sensors plug-and-play and IPv6 communication functions. The paper realized dynamic description of network data flow from underlying sensor, intelligent measuring and control node to remote monitor and control application by UML modeling, and finished a general XML data-exchanging interface design. The designed MCS was applied in the process industry of ethanol production. The application results show that it realizes accurate and efficient transmission by using XML data exchanging technology based on IEEE1451 standard. Its data exchanging delay is about 0.51 ms, which can satisfy the requirements of openness, crossing platform and network real-time monitoring application.

Key words: measuring and control system, IEEE1451, eXtensible Markup Language (XML), data exchanging, Internet of Things (IoT)

中图分类号: