[1] MATAR M, KARIMI H, ETEMADI A, et al. A high performance real-time simulator for controllers hardware-in-the-loop testing[J]. Energies, 2012,5(6):1713-1733. [2] SHAN J, MENG X, DING Y, et al. Hardware-in-the-loop simulation[M]. 2nd ed. Beijing: National Defense Industry Press, 2013:7-10.(单家元,孟秀云,丁艳,等.半实物仿真[M].2版.北京:国防工业出版社,2013:7-10.) [3] YOO I D, GOLE A M. Compensating for interface equipment limitations to improve simulation accuracy of real-time power hardware in loop simulation[J]. IEEE Transactions on Power Delivery, 2012,27(3):1284-1291. [4] YANG J, LI Y. Hardware-in-the-loop simulation of communication networks[J]. Journal of Beijing Institute of Technology, 2012,21(3):376-381. [5] MAHMOOD A, EXEL R, SAUTER T. Delay and jitter characterization for software-based clock synchronization over WLAN using PTP[J]. IEEE Transactions on Industrial Informatics, 2014,10(2):1198-1206. [6] FERRARI P, FLAMMINI A, RINALDI S, et al. Experimental characterization of uncertainty sources in a software-only synchronization system[J]. IEEE Transactions on Instrumentation and Measurement, 2012,61(5):1512-1521. [7] SCHEITERER R L, NA C, OBRADOVIC D, et al. Synchronization performance of the precision time protocol in industrial automation networks[J]. IEEE Transactions on Instrumentation and Measurement, 2009,58(6):1849-1857. [8] GIORGI G, NARDUZZI C. Performance analysis of Kalman-filter-based clock synchronization in IEEE 1588 networks[J]. IEEE Transactions on Instrumentation and Measurement, 2011,60(8):2902-2909. [9] ZHUANG X, WANG H. IEEE 1588 clock synchronization algorithm based on Kalman filter[J]. Journal of Electronic Measurement and Instrument, 2012,26(9):747-751.(庄晓燕,王厚军.基于卡尔曼滤波器的 IEEE 1588时钟同步算法[J].电子测量与仪器学报,2012,26(9):747-751.) [10] CIUFFOLETTI A. Preventing the collision of requests from slave clocks in the Precision Time Protocol (PTP)[J].IEEE Transactions on Instrumentation and Measurement, 2011,60(6):2096-2103. [11] LIU Y, YANG C. OMNeT++ based modeling and simulation of the IEEE 1588 PTP clock[C]//Proceedings of the 2011 International Conference on Electrical and Control Engineering. Piscataway: IEEE,2011:4602-4605. [12] WALKER J, CANTONI A. Experimental evaluation of the jitter generated in timing transfer[J]. IEEE Transactions on Communications, 2010,58(12):3605-3612. [13] WEI F, SUN W. Precise time stamping method for IEEE1588 clock synchronization message[J]. Journal of Electronic Measurement and Instrument, 2009,30(1):162-169.(魏丰,孙文杰.协议时钟同步报文的精确时间标记方法研究[J].仪器仪表学报,2009,30(1):162-169.) [14] FERRARI P, FLAMMINI A, RINALDI S, et al. On the seamless interconnection of IEEE1588-based devices using a PROFINET IO infrastructure[J]. IEEE Transactions on Industrial Informatics, 2010,6(3):381-392. [15] EXEL R. Mitigation of asymmetric link delays in IEEE 1588 clock synchronization systems[J]. IEEE Communications Letters, 2014,18(3):507-510. |