计算机应用 ›› 2011, Vol. 31 ›› Issue (08): 2282-2285.DOI: 10.3724/SP.J.1087.2011.02282

• 典型应用 • 上一篇    下一篇

基于微多普勒分析的复合运动目标参数估计

陈广锋1,2,张林让2,刘高高2,王纯2   

  1. 1. 西安文理学院 数学系,西安710065 2. 西安电子科技大学 雷达信号处理国家重点实验室,西安710071
  • 收稿日期:2011-02-24 修回日期:2011-04-21 发布日期:2011-08-01 出版日期:2011-08-01
  • 通讯作者: 陈广锋
  • 作者简介:陈广锋(1973-),男,陕西蓝田人,副教授,博士研究生,主要研究方向:微动特征提取、微动参数估计;张林让(1966-),男,陕西宝鸡人,教授,博士生导师,博士,主要研究方向:阵列信号处理、自适应信号处理、雷达系统建模与仿真;刘高高(1983-),男,陕西宝鸡人,博士研究生,主要研究方向:合成孔径雷达信号处理;王纯(1983-),女,陕西西安人,博士研究生,主要研究方向:阵列信号处理。
  • 基金资助:

    国家自然科学基金资助项目(60672130);西安文理学院科研项目(KYC200802)

Parameter estimation of complex moving target based on micro-Doppler analysis

Guang-feng CHEN1,2,Lin-rang ZHANG2,Gao-gao LIU2,Chun WANG2   

  1. 1. Department of Mathematics, Xi'an University of Arts and Science, Xi'an Shaanxi 710065, China
    2. National Key Laboratory of Radar Signal Processing, Xidian University, Xi'an Shaanxi 710071, China
  • Received:2011-02-24 Revised:2011-04-21 Online:2011-08-01 Published:2011-08-01
  • Contact: Guang-feng CHEN

摘要: 目标的微运动所产生的微多普勒特征包含了目标的运动和结构信息,在目标的分类、识别等领域中有着重要的作用。建立了具有平动、加速与旋转运动的微动模型,定量分析了目标的微多普勒调制特征及其与微动参数的关系,利用提取时频分析矩阵频率向最大值的峰值提取法和最小二乘拟合直线法估计目标的加速度、旋转频率和旋转半径等参数,最后通过仿真验证了理论分析的正确性和参数估计的有效性。

关键词: 微多普勒分析, 旋转, 加速度, 时频分析, 参数估计

Abstract: Micro-Doppler signature produced by micro-motion contains movement and structure information, which is useful for radar classification and recognition. In this paper, complex micro-motion scattering point with rotation and acceleration was modeled. Based on a quantitative analysis on micro-Doppler modulation, the acceleration, rotational frequency and rotational radius were estimated by peak value extraction method which extracted time-frequency analysis matrix maximum along the frequency and least square fitting straight line method. Finally, the simulation results verify the correctness of the theoretical analysis and the validity of the parameter estimation.

Key words: micro-Doppler analysis, rotation, acceleration, time-frequency analysis, parameter estimation

中图分类号: