计算机应用 ›› 2012, Vol. 32 ›› Issue (04): 910-912.DOI: 10.3724/SP.J.1087.2012.00910

• 网络与通信 • 上一篇    下一篇

分布式无线通信系统中协同传输预编码方法分析

杨军1,张正孝2,李敏之2,蒋占军2,3   

  1. 1. 兰州交通大学 研究生学院,兰州 730070
    2. 兰州交通大学 电子与信息工程学院,兰州 730070
    3. 东南大学 移动通信国家重点实验室,南京 210096
  • 收稿日期:2011-09-18 修回日期:2011-11-17 发布日期:2012-04-20 出版日期:2012-04-01
  • 通讯作者: 张正孝
  • 作者简介:杨军(1973-),男,宁夏吴忠人,副教授,博士,主要研究方向:计算机图形学、虚拟现实、数字图像处理;
    张正孝(1980-),男,甘肃白银人,硕士研究生,主要研究方向:未来移动通信系统协同传输;
    李敏之(1980-),女,甘肃兰州人,博士研究生,主要研究方向:未来移动通信系统协同传输;
    蒋占军(1975-),男,宁夏中卫人,副教授,博士,主要研究方向:未来移动通信系统基础理论与技术。
  • 基金资助:
    教育部高等学校博士学科点专项科研基金资助项目;甘肃省高等学校基本科研业务费资助项目;兰州交通大学“青蓝”人才工程基金资助项目;东南大学移动通信国家重点实验室开放研究基金资助项目

Analysis of coordinated transmission pre-coding in distributed wireless communication system

YANG Jun1,ZHANG Zheng-xiao2,LI Min-zhi2,JIANG Zhan-jun2,3   

  1. 1. School of Graduate Studies, Lanzhou Jiaotong University, Lanzhou Gansu 730070, China
    2. School of Electronic and Information Engineering, Lanzhou Jiaotong University, Lanzhou Gansu 730070, China
    3. National Mobile Communications Research Laboratory, Southeast University, Nanjing Jiangsu 210096, China
  • Received:2011-09-18 Revised:2011-11-17 Online:2012-04-20 Published:2012-04-01
  • Contact: ZHANG Zheng-xiao

摘要: 在分布式无线移动通信多点协同传输系统中,对于小区边缘用户而言,信道质量的恶化将导致系统接收性能的下降,为此,可以使用协同编码处理以提高接收质量。提出了一种协同传输联合预编码方法,系统针对协同的远端天线单元(RAU)进行联合处理,各RAU根据信道状态信息好坏采用不同的预编规则对同一用户发送数据,而在接收端使用最大比合并的方式对各链路信号进行处理。仿真实验结果表明,该方法能有效地改善用户的误码率性能,提高传输可靠性。

关键词: 协同多点, 分布式无线通信网络, 远端天线单元, 预编码, 误码率

Abstract: In distributed wireless communication and Coordinated Multi-Point (CoMP) system, the deterioration of channel quality seriously affect the system receptivity of edge users, and therefore the coordinated coding processing is used to improve the quality of reception. A coordinated transmission and joint pre-coding method was proposed in this paper. Coordinated Remote Antenna Units (RAU) were processed jointly. According to the state information of channel, different pre-coding rules were adopted by each RAU to transmit data to the same user. A Maximal-Ratio Combining (MRC) algorithm was used to calculate the received signals of terminals. The simulation results show that the proposed method can effectively decrease the Bit Error Rate (BER) and improve the transmission reliability.

Key words: Coordinated Multi-Point (CoMP), distributed radio mobile communications network, Remote Antenna Unit (RAU), pre-coding, Bit Error Rate (BER)