计算机应用 ›› 2012, Vol. 32 ›› Issue (08): 2128-2132.DOI: 10.3724/SP.J.1087.2012.02128

• 网络与通信 • 上一篇    下一篇

突发QAM信号盲识别算法

刘聪杰,彭华,吴迪   

  1. 信息工程大学 信息工程学院,郑州 450002
  • 收稿日期:2012-02-06 修回日期:2012-03-30 发布日期:2012-08-28 出版日期:2012-08-01
  • 通讯作者: 刘聪杰
  • 作者简介:刘聪杰(1984-),男,河北任丘人,硕士研究生,主要研究方向:突发信号解调;
    彭华(1973-),男,江西萍乡人,教授,博士生导师,博士,主要研究方向:数字信号均衡与解调、软件无线电;
    吴迪(1984-),男,福建建阳人,博士研究生,主要研究方向:短波信号检测与解调。
  • 基金资助:
    国家自然科学基金资助项目(61072046)

Blind modulation recognition algorithm of burst QAM signal

LIU Cong-jie,PENG Hua,WU Di   

  1. Institute of Information Engineering, Information Engineering University, Zhengzhou Henan 450002, China
  • Received:2012-02-06 Revised:2012-03-30 Online:2012-08-28 Published:2012-08-01
  • Contact: LIU Cong-jie

摘要: 针对非协作通信中的7种正交幅度调制(QAM)方式识别问题,提出一种新的基于联合特征的盲识别算法。该算法在对信号的循环平稳性以及QAM瞬时幅度分布特点讨论和分析基础上,采用基于循环平稳检测、四阶零次共轭循环累积量以及瞬时包络的联合特征,并选择二叉树支持向量机作为识别分类器,完成了对7种中频QAM信号的识别。仿真实验表明,该算法在码元数目为1000,信噪比大于6dB时,正确识别率可达到90%以上。

关键词: 调制识别, 正交幅度调制信号, 循环平稳检测, 四阶循环累积量, 瞬时包络, 二叉树, 支持向量机

Abstract: For the modulation recognition of seven kinds of Quadrature Amplitude Modulation (QAM) in non-cooperative communication, a new blind identification algorithm was proposed based on combined features. Based on the discussion and analysis of the cyclostationarity and the instantaneous amplitude distribution of the QAM signals, the algorithm used the combined features which were cyclostationary detection feature, fourth-order zero-conjugate cyclic accumulation feature and instantaneous envelope feature. The algorithm used the binary tree support vector machine as classifier to classify the seven Intermediate Frequency (IF) QAM signals. The simulation results show that the correct recognition rate of the algorithm reaches over 90% when the number of symbols is 1000 and the Signal-to-Noise Ratio (SNR) is more than 6dB.

Key words: modulation recognition, Quadrature Amplitude Modulation (QAM) signal, cyclostationary detection, fourth-order cyclic cumulation, instantaneous envelope, binary tree, Support Vector Machine (SVM)

中图分类号: