Journal of Computer Applications ›› 2021, Vol. 41 ›› Issue (7): 2019-2025.DOI: 10.11772/j.issn.1001-9081.2020081238

Special Issue: 网络与通信

• Network and communications • Previous Articles     Next Articles

Relay selection and performance analysis of multi-relay cooperative spatial modulation

LI Tong1,2, QIU Runhe1,2   

  1. 1. School of Information Science and Technology, Donghua University, Shanghai 201620, China;
    2. Engineering Research Center of Digitized Textile and Fashion Technology, Ministry of Education(Donghua University), Shanghai 201620, China
  • Received:2020-08-18 Revised:2020-12-08 Online:2021-07-10 Published:2021-07-22
  • Supported by:
    This work is partially supported by Surface Program of the National Natural Science Foundation of China (61671143).

多中继协作空间调制的中继选择及性能分析

李彤1,2, 仇润鹤1,2   

  1. 1. 东华大学 信息科学与技术学院, 上海 201620;
    2. 数字化纺织服装技术教育部工程研究中心(东华大学), 上海 201620
  • 通讯作者: 仇润鹤
  • 作者简介:李彤(1997-),女,安徽马鞍山人,硕士研究生,主要研究方向:空间调制、协作通信;仇润鹤(1961-),男,上海人,教授,博士,主要研究方向:无线通信系统、协作中继网络、认知无线电网络。
  • 基金资助:
    国家自然科学基金面上项目(61671143)。

Abstract: A relay selection scheme based on the location of relay node was proposed for the selection problem in a multi-relay cooperative Spatial Modulation (SM) system, and the Bit Error Rate (BER) performance of the system was analyzed. The SM technique was used at the source node by the system, only one transmitting antenna was activated in each time slot, and based on the location information of the relay node, the Amplify Forward (AF) relay closest to the midpoint between the source node and the destination node was selected among all relays in each time slot for forwarding. The approach of moment generating function was used to derive the solution of the pairwise error probability of the system under Rayleigh fading channel, and therefore the theoretical BER of the system was given. Simulation results show that this relay selection method can achieve better BER performance of the system compared with the relay random selection and cyclic forwarding methods.

Key words: Spatial Modulation (SM), cooperative communication, Amplify Forward (AF), Bit Error Rate (BER), multi-relay

摘要: 针对多中继协作空间调制(SM)系统中的中继选择问题,提出一种基于中继节点位置的选择方案,并将该方案应用于系统中,对系统的误比特率(BER)性能进行了分析。该系统在源节点使用SM技术,每一时隙仅激活一根发射天线,并基于中继节点的位置信息,在全部中继中选择最接近源节点和目的节点间中点的一个放大转发(AF)中继进行转发。运用矩生成函数法推导了该系统在瑞利衰落信道下成对错误概率的解,并由此给出了系统的理论BER。仿真结果表明,与随机选择和循环转发中继的方法相比,该中继选择方法能够在系统中获得更好的BER性能。

关键词: 空间调制, 协作通信, 放大转发, 误比特率, 多中继

CLC Number: