Journal of Computer Applications ›› 2012, Vol. 32 ›› Issue (12): 3365-3368.DOI: 10.3724/SP.J.1087.2012.03365

• Graphics and image technology • Previous Articles     Next Articles

3D reconstruction method based on turntable multiple-view registration

LI Huai-ze,SHEN Hui-liang,CHENG Yue   

  1. Department of Information and Electronic Engineering, Zhejiang University, Hangzhou Zhejiang 310027,China
  • Received:2012-06-21 Revised:2012-08-03 Online:2012-12-29 Published:2012-12-01
  • Contact: SHEN Hui-liang

基于旋转多视角深度配准的三维重建方法

李怀泽,沈会良,程岳   

  1. 浙江大学 信息与电子工程学系, 杭州 310027
  • 通讯作者: 沈会良
  • 作者简介:李怀泽(1987-),男,山西阳泉人,硕士研究生,主要研究方向:立体视觉、三维重建;〓沈会良(1974-),男,浙江杭州人,教授,主要研究方向:图像处理、计算机视觉;〓程岳(1985-),男,陕西咸阳人,博士研究生,主要研究方向:计算机视觉。
  • 基金资助:
    国家973计划项目

Abstract: An effective registration approach was proposed for multiple-view images captured on a turntable. In combination with binocular stereo, a complete system for 3D reconstruction was proposed. The calibration target was mounted on a step-motor-controlled turntable and it was acquired under multiple views. The coordinate transformation between the turntable and the camera coordinate systems was computed by the angular point information on the calibration target. The coordinate transformation among multiple views was used for data registration at the fixed viewpoint. The experimental results show that the proposed registration method achieves high precision and can be effectively used in 3D reconstruction.

Key words: multiple-view, turntable, registration, 3D reconstruction, binocular stereo vision

摘要: 针对在旋转平台上采集得到的多视角数据,提出一种有效的配准方法,同时结合双目立体视觉测量构建了完整的三维重建系统。通过拍摄旋转平台上多个视角下的标定板图像,提取标定板图像角点信息,计算出旋转平台坐标系和摄像机坐标系的空间位置关系,进一步推导出不同视角下的坐标转换关系,从而实现不同视角的数据配准。实验结果表明,基于本配准方法的旋转多视角双目测量系统具有较高的配准精度,能有效用于物体表面三维重建。

关键词: 多视角, 旋转平台, 配准, 三维重建, 双目立体视觉