uClinux在S698处理器上的移植研究与实现

doi:10.3724/SP.J.1087.2005.1055

计算机应用 ›› 2005, Vol. 25 ›› Issue (05): 1055-1057.DOI: 10.3724/SP.J.1087.2005.1055

uClinux在S698处理器上的移植研究与实现

占文静，张凯

北京理工大学计算机科学与工程系

发布日期:2005-05-25 出版日期:2005-05-01

Research on transplant of uClinux in S698 microprocessor

ZHAN Wen-jing, ZHANG Kai

Department of Computer Science and Engineering, Beijing Institute of Technology, Beijing 100081, China

Online:2005-05-25 Published:2005-05-01

摘要/Abstract

摘要： 研究了如何在自主知识产权的“中国芯”S698上移植uClinux操作系统。选择对SPARCNOMMU支持的内核版本uClinux2. 0.x,在简单介绍S698硬件结构后,就开发环境、引导程序、操作系统内核的移植、romfs文件系统、操作系统映像的构建等方面进行研究分析,并给出实现方法步骤,该移植在S698处理器应用开发板上实现。

关键词: S698, SPARC, uClinux

Abstract: The method of transplanting open source uClinux to S698 microprocessor, which was made in China and had its own intellectual property, was studied. After the introduction of S698 architecture, the development environment was built, bootstrap, romfs, OS kernel transplant and construction were analyzed, and the solution to these problems was brought forward. The transplant was implemented on S698 Application Development Board.

Key words: S698, SPARC, uClinux

中图分类号:

TP316.2

占文静，张凯. uClinux在S698处理器上的移植研究与实现[J]. 计算机应用, 2005, 25(05): 1055-1057.

ZHAN Wen-jing, ZHANG Kai. Research on transplant of uClinux in S698 microprocessor[J]. Journal of Computer Applications, 2005, 25(05): 1055-1057.

[1]	宋杰戴冠中刘航. 一种嵌入式VPN网关系统的设计与实现[J]. 计算机应用, 2007, 27(3): 543-545.
[2]	杨波，徐成. 嵌入式CANEthernet网关的设计与实现[J]. 计算机应用, 2005, 25(02): 273-275.

uClinux在S698处理器上的移植研究与实现

Research on transplant of uClinux in S698 microprocessor

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics