计算机应用 ›› 2011, Vol. 31 ›› Issue (07): 1959-1961.DOI: 10.3724/SP.J.1087.2011.01959

• 网络与通信 • 上一篇    下一篇

基于最大干扰网络编码的应用层多播算法

刘永广1,2,3,张剑3,姚若河2   

  1. 1. 广东轻工职业技术学院 管理工程系,广州 510300
    2. 华南理工大学 电子与信息学院,广州 510640
    3. 中国电子科技集团 第七研究所,广州 510310
  • 收稿日期:2010-12-09 修回日期:2011-01-30 发布日期:2011-07-01 出版日期:2011-07-01
  • 通讯作者: 刘永广
  • 作者简介:刘永广(1972-),男,河北高邑人,高级工程师,博士,主要研究方向:网络合成、网络编码;张剑(1963-),男,河南信阳人,研究员,博士,主要研究方向:军事通信系统;姚若河(1961-),男,广东揭阳人,教授,博士,主要研究方向:集成电路系统。
  • 基金资助:

    国家自然科学基金资助项目

Application-layer multicast algorithm based on maximum interference network coding

Yong-guang LIU1,2,3,Jian ZHANG2,Ruo-he YAO1   

  1. 1. Department of Management Engineering, Guangdong Industry Technical College, Guangzhou Guangdong 510300,China
    2. NO.7 Research Institute, China Electronics Technology Group Corporation, Guangzhou Guangdong 510310,China
    3. School of Electronic and Information Engineering, South China University of Technology, Guangzhou Guangdong 510640,China
  • Received:2010-12-09 Revised:2011-01-30 Online:2011-07-01 Published:2011-07-01
  • Contact: Yong-guang LIU

摘要: 构建于终端系统的应用层多播具有网络层多播不可比拟的优势,为了提高应用层多播的效率和性能,提出一种基于最大干扰网络编码的应用层多播算法。该算法在采用网络编码的基础上,在多播路径选择上通过考虑源到多个目的节点路径间的最大干扰,来提高编码的利用效率,有效节省带宽。仿真表明,相比较一般应用层多播算法和基于网络编码的多播算法,本算法在提高网络吞吐量和资源利用率方面都有更好的表现。

关键词: 最大干扰, 网络编码, 应用层多播

Abstract: The application-layer multicast in end-system has overwhelming advantages compared with network-layer multicast. For improving the efficiency and performance of application-layer multicast, a multicast algorithm based on maximum interference network coding was presented. After adopting network coding, the new algorithm selected the maximum interference paths from source to every destination to improve coding efficiency and save network bandwidth. The simulations show that compared with non-coding multicast and simple network coding multicast algorithm, the new algorithm performs better in network throughout put and resource utilization.

Key words: maximum interference, network coding, application layer multicast