Implementation of soft start on design of body control system

doi:10.3724/SP.J.1087.2013.01187

Journal of Computer Applications ›› 2013, Vol. 33 ›› Issue (04): 1187-1190.DOI: 10.3724/SP.J.1087.2013.01187

• Typical applications • Previous Articles

Implementation of soft start on design of body control system

ZHANG Xiaoliang,ZHU Qing,WANG Yaonan,CAO Shiwei

College of Electrical and Information Engineering, Hunan University, Changsha Hunan 410082, China

Received:2012-09-06 Revised:2012-10-29 Online:2013-04-23 Published:2013-04-01
Contact: ZHANG Xiaoliang

基于软启动技术的车身控制器设计与应用

张小亮,朱青,王耀南,曹时伟

湖南大学电气与信息工程学院，长沙 410082

通讯作者: 张小亮
作者简介:张小亮(1987-)，男，河南鄢陵人，硕士研究生，主要研究方向：汽车车身电器控制器研究与设计、驱动编程；朱青(1968-)，女，河南商丘人，副教授，博士，主要研究方向：现代网络、通信、语音图像信息处理、数字信号处理、汽车电子；王耀南(1957-)，男，云南龙陵人，教授，博士生导师，主要研究方向：智能控制理论与机器人系统、图像识别理论与机器视觉应用、先进制造装备智能化控制；曹时伟(1988-)，男，江西吉安人，硕士研究生，主要研究方向：智能电表设计与实现。
基金资助:
国家863计划项目(2012AA111004，2012AA112312)

Abstract

Abstract: To solve the instantaneous overcurrent of the large power inductive load, a body control system based on soft start was established. The abundant peripherals of Micro Control Unit (MCU) and the scalability of Field Programmable Gate Array (FPGA) were fully utilized to implement the rapid sampling of the multiplex switching signals and the output control of the Pulse Width Modulation (PWM) signals. In the software, the program was designed by the modular, which completed the task and met the need of the car. At last, the test shows the Electromagnetic Interference (EMI) on the vehicle is reduced, soft start of the large inductive equipment is realized, and the instantaneous overcurrent of the load is reduced by 40%, so the body control system can be applied with the unmanned vehicle's control

Key words: body control system, Micro Control Unit (MCU), Field Programmable Gate Array (FPGA), Pulse Width Modulation (PWM), soft start

摘要： 针对大功率感性车身电器启停期间的瞬间电流过大的问题，建立一种基于软启动技术的车身控制器。该控制器充分利用单片机(MCU)的控制资源和大规模可编程逻辑门阵列(FPGA)的可扩展优势，实现了对多路开关量信号的快速采样和脉冲宽度调试信号(PWM)信号的输出。在控制软件设计方面，采用结构化模块设计方法，有效地完成了车身控制器的功能和要求。测试结果表明，该系统有效地改善了整车电磁干扰(EMI)并实现了对大功率感性负载软启动，减少了负载的瞬间启动电流的40%以上，同时完成了无人驾驶电动车的车身控制所需的功能。

关键词: 车身控制器, 单片机, 可编程逻辑器件, 脉冲宽度调制, 软启动

CLC Number:

TP274.2

ZHANG Xiaoliang ZHU Qing WANG Yaonan CAO Shiwei. Implementation of soft start on design of body control system[J]. Journal of Computer Applications, 2013, 33(04): 1187-1190.

张小亮朱青王耀南曹时伟. 基于软启动技术的车身控制器设计与应用[J]. 计算机应用, 2013, 33(04): 1187-1190.

References

［1］DIAS J A A, dos SANTOS E C，JACOBINA C B，et al. Soft-starting techniques for low cost single-phase to three-phase drive system configuration ［C］// PESC 2008: Power Electronics Specialists Conference 2008. [S.l.]: IEEE,2008,6:3996-4002.

［2］刘忠，李时育，金耀.异步电机软启动的变论域模糊自适应控制策略［J］.计算机工程与应用，2010，46(18)：205-208.

［3］方长全，陈刚，陈静.具有无功补偿的高压软启动装置［J］.武汉理工大学学报：信息与管理工程版，2011，33(4)：533-535.

［4］刘晶晶. 分布式车身控制系统设计［J］.国外电子元器件，2005(5)：20-22.

［5］王知学. 基于MC9S12XS128的汽车BCM的设计与实现［J］.电子设计工程，2011，19(3)：190-192.

［6］吴志红.基于TLE7810芯片的电动车窗控制器设计［J］.电子元器件应用，2009，11(1)：10-16.

［7］梁锋华.车身控制系统在我国的发展趋势［J］.汽车电器，2009(3)：1-4.

［8］高卫国.广义模块化设计原理及方法［J］.机械工程学报，2007，43(6)：48-54.

［9］王俊.基于CAN_LIN总线混合网络的BCM平台的构建与研究［D］.武汉:武汉理工大学，2010.

［10］徐军辉.车身网络控制系统关键技术的研究与实现［D］.哈尔滨：哈尔滨工业大学，2010.

［11］谢婧，王亚斌，来金梅，等.用于FPGA快速重构的配置电路［J］.复旦学报：自然科学版，2010，49(2)：165-170，176.

［12］徐德成.基于FPGA的按键消抖动设计［J］.吉林师范大学学报：自然科学版，2009，4(11)：154-156.

［13］于晶.基于FPGA的按键消抖电路设计方法的研究［J］.电子设计工程，2011，19(22)：1-3.

［14］陈无畏.汽车车身电子与控制技术［M］.北京：机械工业出版社,2008:12-21.

［15］陈勇.汽车测试技术［M］.北京：北京理工大学出版社，2008:63-78.

[1]	Yingjie MA, Jing XIAO, Geng ZHAO, Ping ZENG, Yatao YANG. Controllable grid multi-scroll chaotic system family and its hardware circuit implementation [J]. Journal of Computer Applications, 2023, 43(3): 956-961.
[2]	Binwei SONG, Yao WANG. Low-cost pay-per-use licensing scheme for FPGA intellectual property protection [J]. Journal of Computer Applications, 2023, 43(10): 3142-3148.
[3]	HUANG Chengcheng, DONG Xiaoxiao, LI Zhao. Deep pipeline 5×5 convolution method based on two-dimensional Winograd algorithm [J]. Journal of Computer Applications, 2021, 41(8): 2258-2264.
[4]	WANG Xiaofeng, JIANG Penglong, ZHOU Hui, ZHAO Xiongbo. Design of FPGA accelerator with high parallelism for convolution neural network [J]. Journal of Computer Applications, 2021, 41(3): 812-819.
[5]	XU Yingxin, SUN Lei, ZHAO Jiancheng, GUO Songhui. Virtual field programmable gate array placement strategy based on ant colony optimization algorithm [J]. Journal of Computer Applications, 2020, 40(3): 747-752.
[6]	LEI Xiaokang, YIN Zhigang, ZHAO Ruilian. FPGA-based convolutional neural network fixed-point acceleration [J]. Journal of Computer Applications, 2020, 40(10): 2811-2816.
[7]	XUE Jun, DUAN Fajie, JIANG Jiajia, LI Yanchao, YUAN Jianfu, WANG Xianquan. Parallel cyclic redundancy check Verilog program generating method based on Matlab [J]. Journal of Computer Applications, 2016, 36(9): 2503-2507.
[8]	XIN Xiaoxia, WANG Yi, LI Renfa. FPGA-based implementation for fault detection of SMS4 [J]. Journal of Computer Applications, 2015, 35(2): 420-423.
[9]	LI Kai HE Songhua OU Jianping. Research and application of matching communications between Virtex-5 GTP and Virtex-6 GTX [J]. Journal of Computer Applications, 2014, 34(2): 325-328.
[10]	LIN Shiyao WU Chongyang LI Ruifeng. Embedded motion controller design based on RTEX network [J]. Journal of Computer Applications, 2013, 33(12): 3604-3607.
[11]	ZHANG Wenkai GUAN Guixia ZHAO Haimeng WANG Zhiming WU Taixia YAN Lei. Design of multi-serial communication for micro-satellite simulation system [J]. Journal of Computer Applications, 2013, 33(12): 3477-3481.
[12]	JU Xiaoming ZHANG Jiehao ZHANG Yizhong. Real-time error detection techniques based on FPGA [J]. Journal of Computer Applications, 2013, 33(05): 1459-1462.
[13]	XIE Huimin GUO Donghui. Reconfigurable serial AES encryption and decryption circuit design [J]. Journal of Computer Applications, 2013, 33(02): 450-459.
[14]	WANG Fang-fang YI Ling-zhi CHEN Hai-yan LU Qi-xiang. Design of embedded Ethernet-CAN communication card based on FPGA [J]. Journal of Computer Applications, 2012, 32(05): 1247-1250.
[15]	ZHANG Xiang-xian YANG Tao WEI Dong-mei XIANG Ling. Design and FPGA implementation of parallel high-efficiency BCH decoder [J]. Journal of Computer Applications, 2012, 32(03): 867-869.

Implementation of soft start on design of body control system

基于软启动技术的车身控制器设计与应用

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics