计算机应用 ›› 2015, Vol. 35 ›› Issue (2): 550-554.DOI: 10.11772/j.issn.1001-9081.2015.02.0550

• 计算机软件技术 • 上一篇    下一篇

嵌入式系统硬件可靠性Copula方法建模与分析

郭荣佐1, 樊相奎1, 崔冬霞2, 黎明1   

  1. 1. 四川师范大学 计算机科学学院, 成都 610101;
    2. 四川师范大学 基础教学学院, 成都 610068
  • 收稿日期:2014-09-15 修回日期:2014-11-21 出版日期:2015-02-10 发布日期:2015-02-12
  • 通讯作者: 郭荣佐
  • 作者简介:郭荣佐(1973-),男,四川开江人,教授,主要研究方向:嵌入式系统、物联网感知、系统可靠性; 樊相奎(1979-),男,重庆人,讲师,主要研究方向:嵌入式图形图像处理; 崔冬霞(1979-),女,河南新乡人, 讲师,博士,主要研究方向:计算机与生态环境; 黎明(1966-),男,重庆人,教授,主要研究方向:计算机软件、面向对象编程。
  • 基金资助:

    国家自然科学基金资助项目(61373162,61373163);国家科技支撑计划项目(2012BAH76F01);四川省教育厅自然科学一般项目(15ZB0045);四川师范大学科研项目(ZZYQ2013-05;2013YB005)。

Reliability modeling and analysis of embedded system hardware based on Copula function

GUO Rongzuo1, FAN Xiangkui1, CUI Dongxia2, LI Ming1   

  1. 1. College of Computer Science, Sichuan Normal University, Chengdu Sichuan 610101, China;
    2. College of Fundamental Education, Sichuan Normal University, Chengdu Sichuan 610068, China
  • Received:2014-09-15 Revised:2014-11-21 Online:2015-02-10 Published:2015-02-12

摘要:

嵌入式系统硬件的可靠性是十分重要的,它直接关系到嵌入式系统的质量和寿命。为了对嵌入式系统的硬件可靠性进行分析,利用Copula方法从硬件角度和层面对其进行研究。首先从嵌入式系统硬件的组成层面对其进行抽象定义;然后从组成嵌入式系统硬件的每个功能模块出发,对每个功能模块从软硬件综合角度进行可靠性建模,同时利用Copula函数建立了嵌入式系统硬件的可靠性模型;最后对嵌入式系统硬件可靠性模型的参数进行估计,给出具体的嵌入式系统硬件可靠性计算实例,并将所建立的模型与其他类型的Copula函数进行比较。通过实例化分析和验证结果表明,得到的嵌入式系统硬件Copula函数模型是切实可行的。

关键词: 嵌入式系统硬件, 可靠性, 建模与分析, Copula函数

Abstract:

The reliability of Embedded System Hardware (ESH) is very important, which is directly related to the quality and longevity of the embedded system. To analyze the reliability of ESH, it was studied on the perspective of hardware using Copula function. At first, abstract formalization of the ESH was defined from composition level. Then reliability modeling of each function module of the ESH was given by considering integration of hardware and software, as well as using Copulas function to establish the reliability model of ESH. Finally, the parameters of the proposed reliability model were estimated, and a specific calculation example by using this proposed model was put forward and compared with some other Copulas functions. The result shows that the proposed model using Copula function is effective.

Key words: Embedded System Hardware (ESH), reliability, modeling and analysis, Copula function

中图分类号: